Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 24 / 60

3
1
2
24
Angle adjustable back sup-
port code 29
The back support is adjustable by
max. +/– 15° in three steps of 5° each
(1)+(2).
– Loosen the attachment screws (3)
on both sides.
☞
Priorly remove the drive wheel in
order to loosen the screw of the
left back support tube.
– Position the back support tubes
parallel, according to the desired
angle.
– After the adjustment retighten the
screws (1) on both sides.
!
Attention:
After each adjustment of the back
support the screwed connection is
to be checked for secure hold!