Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 44 / 60

4
2
1
3
44
Repositioning the brakes
After each repositioning of the drive
wheels (wheel base extension) both
brakes are to be checked for function
and repositioned if necessary.
☞
Note:
Repositioning of the brakes as well
as the required adjustment should
be carried out by the specialist
dealer!
1. Remove the cover cap (1) of one
pressure brake (2).
2. Remove the screws (3) of the pres-
sure brake.
3. Preadjust the respective pressure
brake by repositioning.
Preadjustment of the pressure brake:
– For this slide the brake bolt of
the activated pressure brake di-
rectly in front of the drive wheel
and align it at a right angle to the
drive wheel. Afterwards loosen the
brake and push it back 5 mm to-
wards the drive wheel.
4. Remount the screws (3) of the
pressure brake in the correspond-
ing position (4).
☞
Adjust the pressure brake as de-
scribed in chapter < Adjusting the
brakes >.
5. Remount the cover cap (1) of the
pressure brake.
Reposition the opposite pressure
brake as described.