Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 27 / 60

3
2
1
27
Stabiliser rod
The stabiliser rod (1) stretches the back
strap at the top, serves to attach the
head support and is secured against
being pulled out.
☞
Note:
Only in combination with height ad-
justable push handles
The stabiliser rod can be removed in
order to fold the wheelchair.
Removing/attaching the stabiliser
rod
– Press the locking button (2) of the
respective axle on both sides.
– Remove (3) or insert (1) the stabi-
liser rod.
☞
Note:
Always carry out a tensile test after
inserting the axles!
!
Attention:
After inserting the stabiliser rod
the locking button must still pro-
trude some millimetres from the
axle.
• The stabiliser rod is secured.
☞
Note:
The locking bolt of the axle is to be
kept clean. A functional fault may
occur in the case of contamination
due to sand or earth or in the event
of freezing of moist cold air.