Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 33 / 60

7
5
6
33
Wheel camber
The wheel camber can be set to 3°, 6°
or 9° by way of different axle mount
adapters (5).
☞
Note:
Assembly should be carried out in
a suitable specialist workshop!
Adjusting the wheel camber
1. Detach the drive wheels.
☞
Hereto observe chapter < Wheels
>.
2. Loosen the clamping screws (6) of
the clamp.
3. Unscrew the centring screws (7)
rather far and pull the axle recep-
tacle adapters (2) out.
4. Insert the quick-release axle adapt-
er (5) with the desired wheel cam-
ber into the receptacle tube.
☞
In doing so the centring hole fac-
es upward, vertically to the lower
frame tube.
5. Turn the centring screws (7) into
the respective centring hole.
☞
This makes an adjustment of the
toe-in unnecessary.
6. Retighten the clamping screws (6)
of the clamp.
7. Replace the drive wheels.
☞
Hereto observe chapter < Wheels
>.