Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 19 / 60

5
3
4
2
1
6
6
19
Adjusting the angle of the foot-
board
The footboard can be adjusted by two
positions each in both directions and
angle (1)+(2).
– Screw out the attachment screws
(3) on both sides.
☞
Note:
Watch for loose parts such as nuts
and washers!
– Swivel the footboard bracket (4)
parallel into the desired angle.
– Reassemble the attachment screws
(3) on both sides.
☞
Note:
Make sure that one washer is locat-
ed each on the inside and outside
between the footboard holder (5)
and footboard bracket (4)!
Adjusting the depth of the foot-
board
The footboard can be placed differ-
ently in depth for further positions.
– Screw out the attachment screws
(6) on both sides.
– Reposition the footboard in depth
into the corresponding hole of the
footboard bracket.
– Reassemble the attachment screws
(6) on both sides.