Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 36 / 60

1
2
3
4
4
36
Stick-in support wheels
Removing/attaching the support
castor
Press the respective spring button (4)
in order to remove (1) / insert (2)+(3)
the support castors.
When replacing the support castors
(2)+(3) slide them in until the spring
button automatically snaps into
place.
☞
Note:
The spring button must engage vis-
ibly and audibly. – Check the func-
tion!
Adjusting the support castor
Press the spring button to adjust the
support castor (2), the reposition the
support castor accordingly until the
spring button automatically locks into
the next position.
☞
Note:
The spring button must engage vis-
ibly and audibly. – Check the func-
tion!
Correct support castors length
The support castors must reach further
out than the drive wheels in order to
achieve a suffi cient support function.
!
Attention:
For suffi cient tilting stability both
support castors are to be posi-
tioned evenly.
•
Have the function checked by the
specialist dealer after each change
to the seat height and wheel size!
☞
Note:
Therefore observe the safety in-
structions < Mechanical wheel-
chairs > chapter < Inclinations,
overcoming obstacles > as well as <
Driving on elevators, lifts and esca-
lators
>!