Meyra MEX-S 1.134, Руководство по эксплуатации

Страница: 34 / 60

4
2
3
34
SEAT BELT
The seatbelt serves to strap in a per-
son sitting in the wheelchair.
– Additional stabilisation of the sit-
ting position.
– Prevents the user from falling for-
wards out of the wheelchair.
– Continuous adjustment to suit the
user’s needs.
The seatbelt is threaded into the re-
spective back support tube. The posi-
tion of the seatbelt loops are previ-
ously defi ned by a freeing in the back
strap.
☞
Note:
The retrospective assembly of a re-
taining strap is only to be carried
out by a specialist workshop!
!
Attention:
The retaining strap is not part of
the retaining system for the wheel-
chair and/or user during transport
in a handicapped vehicle.
Fastening the seatbelt with buck-
le
–
Pull both belt halves to the front
and slide the catch halves together
so that they latch together. Then
carry out a pull test.
To open the seatbelt the red locking
button (2) is pressed down.
!
Attention:
Make sure that no objects are
trapped between belt and the
body! – Thus you avoid painful
pressure points
Adjustment of belt length
☞
Note:
The seatbelt should not be pulled
too tight.
The length of the seatbelt can be
changed by sliding the buckle (3) and
/ or pulling the end of the strap (4).