FP4, FP4W
8
Tools and consumables
Before starting work ensure that you have suitably required tools and/or consumables
available at the work place.
Protective clothing
Consider whether you and/or others in the vicinity require any protective clothing to
protect against the hazards of, for example, chemicals, high/low temperature, radiation,
noise, falling objects, and dangers to eyes and face.
Permits to work
All the work must be carried out or be supervised by a suitably competent person.
Installation and operating personnel should be trained in the correct use of the product
according to the Installation and Maintenance Instructions. Where a formal 'permit to work'
system is in force it must be complied with. Where there is no such system, it is
recommended that a responsible person should know what work is going on and, where it
is necessary, arrange to have an assistant whose primary responsibility is safety.
Post 'warning notices' if it is necessarily required.
Cleaning and maintenance
Metronic AKP products require no maintenance beyond periodic battery replacement.
Expected battery life is 10 years after the expiry of which must be returned to the
manufacturer for a replacement.
From time to time you should clean the casing with a dry, soft cloth. When cleaning, do
not use solvents or abrasives. They may cause discoloration or scratch the surfaces of
device.
Disposal
The FP4/FP4W contains a battery. On disposal of the unit or component, appropriate
precautions should be taken in accordance with Local/National regulations.
Unless otherwise stated in the Installation and Maintenance Instructions, with the
exception of the battery, this product is recyclable and no ecological hazard is anticipated
with its disposal providing due care is taken.
Returning products
Customers are reminded that under EHS regulations, when returning products to
Metronic AKP they must provide information on any hazards and the precautions to be
taken due to contamination residues or mechanical damage which may present
Environment, Health and Safety (EHS) risk. This information must be provided in writing
including Health and Safety data sheets relating to any substances identified as hazardous
or potentially hazardous.
