FP4, FP4W
39
10.4 Alarms
The Alarms window contains alarm statuses for all channels. This window is displayed
only when at least one alarm is enabled. For each of the channels is assigned a single
rectangle divided into two parts corresponding to the first and second alarm respectively.
Identification of alarms is possible using the appropriate colors:
- alarm disabled
- alarm enabled, inactive
- alarm enabled, active
If the alarm color is not declared (selected from the list during configuring alarms
settings as
Disabled
), it will be marked in blue when an alarm occurs.
If the displayed color (red, green, yellow, blue) flashes, then the alarm is
unacknowledged. Continuous displaying of the color means confirmed alarm.
Fig. 10.4 A
n example view of the ‘Alarms’ window.
Confirmation of alarms is done by pressing the button
(required
access level: User or higher).
10.5 Output window
The Output window contains the current statuses of all relay outputs and the analogue
output. This window is displayed only when at least one relay outputs or analogue output
is enabled.
The window is divided into two parts. In the upper part of the screen there is an
information about the current value of the analog
ue output (the ‘-----’ symbol means that
the output is turned off).
At the bottom of the screen there is an information about the status of relay outputs
(marked as RL1 - RL4). The outputs are presented graphically (the icon means open
state, the icon means closed state). The output configured as disabled is in the open
state (the icon).
