FP4, FP4W
38
Fig. 10.2
An example view of the ‘Single result’ window.
Using the arrows (appearing on the sides of the screen), a change of the displayed
channels is possible. Keeping the arrows down for a few seconds enables sequentially
displaying other channels.
10.3 Archive
Archive window is sub-divided into two parts. Above is the field containing information
about the frequency of the archiving data. There is also information about number and
type of current archives. For the current data archive, two archiving frequencies have been
envisaged. The active one is marked in black (inactive is marked in grey). In this field there
is an information about the frequency of the archiving totalizers. Additionally, this field
contains information concerning the percentage use of the internal memory of the device.
Below is the field containing information about the current archiving status of process
values and totalizers for all channels (in the order from the first to the sixth channel). In the
Process Values
row, one rectangle corresponds to one channel (current value). In the
Totalizers
row, the upper rectangle corresponds to the first totalizer, the lower one
corresponds to the second totalizer for one channel. The value stored in the archive is
marked in green (not archived value is marked in grey).
This window also contains functional buttons for the control of the archiving process
(STOP/START and New Archive), available for logged-in user. Details of these operations
are described in section
ARCHIVE
.
Fig. 10.3 An example view
of the ‘Archive’ window.
