FP4, FP4W
29
1. Change of the language
General
tab
Language
2. I/O settings
configuration of I/O settings
3. Channel settings
Inputs
tab
configuration
General
tab
configuration
4. Totalizers
∑1
tab
configuration
∑2
tab
configuration
5. Alarms
Alarm 1
tab
configuration
Alarm 2
tab
configuration
6. Recording measurement results
6.1 Channels
General
tab
Archiving
(
/
)
6.2 Totalizers
∑1/∑2
tab
Archiving
(
/
)
6.3 Alarms
Alarm 1
/
Alarm 2
tab
Log event
(
/
)
Change the frequency
of archiving
(
/
)
6.4 Archive
configuration
7. RS-485 transmission
RS485 COM
tab
configuration
8. Ethernet transmission
Ethernet
tab
configuration
9. Display (display brightness/background colour/screen saver parameters)
Display
tab
configuration
10. Changing administrator password
Change password
After configuring and confirming the selection
, click on the
Exit
icon. There will
be a message with the request to confirm the intention to make changes.
Detailed information regarding programming of the individual settings is given in
section
PROGRAMMING SETTINGS
.
Due to the use of the same interface, device configuration using the computer software
FP4 Config.exe
takes place in the same way as configuration from the device level. After
completing the configuration using the computer, record the setting file *.par using a USB
flash memory, as described in the next section.
