Metrohm 930 Compact IC Flex Скачать руководство пользователя страница 36

Страница: 36 / 108

3.10 Metrohm Suppressor Module (MSM)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

930 Compact IC Flex SeS (2.930.1400)

3.10

Metrohm Suppressor Module (MSM)

The suppressor drive of the 930 Compact IC Flex can hold various rotors.
The large rotors, such as the MSM

‑

HC Rotor A (6.2842.000) and the

MSM-HC Rotor C (6.2842.200) can be inserted directly.

The small rotors, such as the MSM Rotor A (6.2832.000) and the MSM-LC
Rotor A (6.2844.000), must first be fitted into the adapter (6.2842.020),
which can then be inserted into the suppressor housing.

A connecting piece (6.2835.010) is used for all rotors for connecting the
Metrohm Suppressor Module (MSM) to the IC system.

6.2842.000

6.2842.020

6.2844.000

6.2842.020

6.2832.000

NOTE

The instruments are supplied without rotor and without adapter.

The suitable rotor and the adapter, if required, must be ordered sepa-
rately.

3.10.1

Inserting the rotors

Accessories

For this step, you need the following accessories:

￭

For suppression: MSM Rotor A (6.2832.000) or MSM

‑

HC Rotor A

(6.2842.000), MSM

‑

LC Rotor A (6.2844.000) or MSM

‑

HC Rotor C

(6.2842.200) or MSM-HC Rotor C (6.2842.200)

￭

Optional: Adapter (6.2842.020)

￭

Connecting piece (6.2835.010)

Large rotors can be inserted directly into the rotor housing.

Содержание 930 Compact IC Flex













































































































Результаты поиска

Содержание 930 Compact IC Flex

Отзывы:

Бренды по названию

Популярные бренды

Metrohm 930 Compact IC Flex, Руководство пользователя

Результаты поиска

Содержание 930 Compact IC Flex

Отзывы:

Бренды по названию

Популярные бренды