METRODATA LTD
WCM1400/WCM1800/WCM1820
Quick Start Guide
76-02-087 Rev D
29 of 61
5.1.6 Warm Start
A warm Start will force the WCM1800 to restart and reload the configuration from the
EEPROM. Note, any changes to configuration that have not been saved to the EEPROM
will be lost.
When a user issues a warm start request, the WCM1800 will indicate that a warm start is
in progress and then close the connection.
5.1.7 Cold Start
Cold Start will return the WCM1800 to the factory default condition and as defined by the
bit switch settings.
Note, that a cold start will erase IP addresses and Routing Table entries and it is therefore
highly likely that remote access will be lost following a cold start.
For this reason a cold start request must be confirmed before it is actioned.
