Metos Culino Combi 40S, Инструкция по установке и эксплуатации

Страница: 15 / 58

15.6.2012 Rev. 1.7
Operating instructions
9
4. Operating instructions
4.1 Before use
Check the following points before using the kettle.
4.1.1 After the installation
Check that
• the kettle has been installed horizontally according to the installation instructions
• all connections (electricity, water and steam) are tight and correctly made.
4.1.2 Before the first use
• Clean the kettle thoroughly with warm detergent solution and remove the dust and
dirt with a cloth. Dry all surfaces after cleaning.
4.1.3 Daily
Check that
• the kettle is in its upright and horizontal position. The kettle does not heat if it is
tilted.
• the scrapers are correctly attached to the mixing tool. See "Positioning the mixing
tool and scraper".
• the mixing tool has been locked in its place: locking part (one end of the handle)
in the groove of the mixer axle, with the handle turned in a horizontal position. Se-
cure fixing by trying to lift the tool out of the kettle by the upper blade.
4.1.4 Quarterly
Check that the safety valve functions correctly:
1. Do the checking when the kettle is empty.
2. Switch the kettle on by turning the green kettle on-off switch to the ON position.
3. Set the cooking temperature to 120°C by pressing the temperature increasing but-
ton marked with "+".
4. When the display indicates 120°C, check that the pressure gauge shows 1,0 bar
pressure.