Metos Culino Combi 40S, Инструкция по установке и эксплуатации

Страница: 20 / 58

15.6.2012 Rev. 1.7
Operating instructions
14
4.2.3 Filling water into the kettle (Culino 40-400)
Depending on the kettle version, the water supply fittings can consist of
1. a faucet (1)
2. a faucet (1) + a two-arm faucet with spray gun (2)
3. a spout for automatic water filling (3)
4. a spout for automatic water filling (3) + one-arm faucet with spray gun (4)
Use only cold tap water for cooking.
4.2.4 Mixer operation
The mixer operates only when the safety lid and the safety grid of the lid opening are at-
tached and closed.
If one of the safety features has interrupted the operation of the mixer, a green indicator
light in the control panel blinks to indicate the interruption.
When the cause of the interruption has been removed, the preset program can be contin-
ued from where it was interrupted.
Positioning the mixing tool and scrapers
Attach the scrapers by placing the pins on the mixing tool into the holes on the scrapers.
After that turn the scraper into place by lif ting the scraper’s lower part. Finally pull the
scraper forward. The bevel (1) will on the lower scraper point upwards and on the side
scraper away from the mixer axle.