Metos Culino Combi 40S, Инструкция по установке и эксплуатации

Страница: 30 / 58

15.6.2012 Rev. 1.7
Operating instructions
24
4.2.6 Operation of the timer (optional)
The timer allows you to start cooking at th e required time and set the cooking duration.
After the set cooking time has elapsed, the temperature of the kettle is automatically set
to +70°C. The holding temperature is on until the kettle is switched off with the on-off
switch. The digital display shows the actual time if the timer is not used, but the kettle has
been switched on.
It is not possible to use the kettle if the timer is activated until the set time is reached or
the timer has been switched off. When the timer is activated, a green light in the top left
corner of the button is illuminated.
Setting and changing the time
1. Press the time increasing "+" and time decreasing "–" buttons at the same time for
about two seconds until the hour display begins to blink.
1. digital timer display
2. starting time programming button
3. time decreasing button
4. time increasing button
2. Set the right hour with the "+" and "–" buttons.
3. Press once the starting time button, the minutes start to blink on the timer display.
4. Set the right minutes with the "+" and "–" buttons.
5. Press once the starting time button, the set time will be memorized and the timer
starts counting.
Setting and changing the starting time
Set the required cooking temperature first.
• Press the starting time button for two seconds until the hours start to blink on the
display.
• Set the starting time (hour) with the "+" and "–" buttons.
• Press once the starting time button, the minutes blink on the display.
• Set the starting time (minute) with the "+" and "–" buttons.
• Press once the starting time button. The starting time will be memorized.
When you use the timer, ensure that the time on the display and the set starting time are
right and you have activated the starting time program (the green is light illuminated).
Checking the set starting time
Press once the "–" button. The display shows the set starting time. After a few seconds the
timer display reverts to the actual time.