Metos Culino Combi 40S, Инструкция по установке и эксплуатации

Страница: 11 / 58

15.6.2012 Rev. 1.7
Functional description
5
3. Functional description
3.1 Operating principle
The Culino kettle is heated with direct steam provided from the facility’s steam network.
The steam jacket reaches the upper edge of the kettle. The cooking procedure is regulated
by electronic temperature control. The kettle tilts by means of a tilting motor (high tilting).
The inner surface of the kettle and the jacket are of acid proof stainless steel (AISI 316).
All other construction is of stainless steel (AISI 304). The kettle is provided with a third
jacket and it is throughout thermally isolated.
The corrosion resistance of stainless steel is due to a so called passive layer, which is a
very thin chromium oxide film. This film is naturally and fairly quickly formed on the
stainless steel surface when the surface is in contact with oxygen (air). The chromium
oxide film is hard, but in some situations it is possible to damage it with hard materials.
When using steel tools, there is a potential risk of scratching the inner jacket and hence
increased risk of corrosion. Therefore, we recommend using wooden or plastic tools in
the kettle, especially when mixing and scraping.
The motor and power transmission (Culino Combi) are situated below the mixing tool.
The kettle with a mixer is provided with a safety lid having a large lid opening. When the
safety lid is open the mixer does not work. The control panel for both the kettle and the
mixer are in the control pillar.
The optional cooling system is based on cold water circulating inside the steam jacket.
Cold water runs in a connection hose from the water faucet, which is in the control pillar,
to the jacket drain valve and further to the outlet pipe of the upper edge and to the floor
drain, which is in front of the kettle.
The optional programmable timer enables to pre-set the starting and cooking times. When
the program is completed, the cooking temperature is automatically set to the Hold tem-
perature (+ 70°C).
The optional automatic water filling enables filling of the kettle with a desired amount of
water. Thus water filling takes place automatically, without supervision.