Metos AE40 Series, Инструкция по установке и эксплуатации

Страница: 24 / 40

17.3.2005 Rev. 2.0
Adjustment instructions
18
6. Adjustment instructions
6.1 Adjustment of special V-belt
Prior to a possible repair or adjustment, switch off the mixer by disconnecting the power
cable.
The distance (X) is only indicative as it depends on the tolerance of the special V-belt.
1. Start by tightening the V-belts (*).
2. Tighten the special V-belt (A) by moving one or two washers from (V) to (T).
3. Start the mixer and leave it running while the nut (U) is tightened. Do not tighten it too
much.
+
=
=
.
.
- -
.
.
.
-
-
$
) 8
7
%
)
( *
(
9
;
9
.
7