Messoa NIC910/930/950HPro, Инструкция по эксплуатации, Страница: 6 / 68

6
Replaced components by the maintenance staff must be official certified parts of
identical specifications. Using unauthorized components can cause fire hazards
and electric shock damage.
14. Safety inspection:
After the unit maintenance has been completed, the maintenance staff must
perform safety inspection to ensure proper operation.
SAFETY INFORMATION
The “
Caution
” label to the left
will be adhered on the unit
CAUTION
RISK OF ELECTRIC SHOCK
DP NOT OPEN
The triangle symbol with lightning arrow indicates that ungrounded
“Hazardous Voltage” exists within the unit. The voltage level may cause
personal electric shock hazards.
The triangle symbol with exclamation mark indicates that there are
important operation and maintenance instructions in the Instruction
Manual.
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions:
(1). This device may not cause harmful interference.
(2). This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to
operate this equipment.
The shielded interface cable recommended in this manual must be used
with this equipment in order to comply with the limits for a digital output
device pursuant to Subpart B of Part 15 of FCC rules.