59
INSTALLATION INSTRUCTIONS
9.1.8 Extension Pole
Extension Pole Installation Instructions
(1) Remove the extension pole and connector ring.
(2) Secure the connector ring to the original connection unit in the clockwise
direction (Figure 1).
(3) Secure the extension pole to the connector ring and use a hex driver to
secure the stop screws in place (Figure 2).
(4) Installation completed.
Note:
When using water sealant, the entire portion of the spiral tooth of the
extension pole and the connector ring must be applied with the sealant. This
will prevent rainwater leaking through the connection.
The space within the ceiling must be greater than 250mm or otherwise the
installation will not fit.
Warning:
When using in an outdoor environment, the safety cable must be connected
to the main unit and safety wire screw hole. This will avoid personal hazards
if the unit falls from its installation.
Make sure there are no damaged parts during assembly.
A
Extension pole (coupling)
B
Extension pole(pipe)
C
Allen key
D
Outdoor housing
Figure 1
Figure 2
Содержание NIC910/930/950HPro
