Messoa NIC910/930/950HPro, Инструкция по эксплуатации, Страница: 43 / 68

43
PRESET COMMANDS
8. Preset Commands
Use the keypad controller preset commands to quickly execute specific functions or per-
form setting changes. Please refer to the following table for the button combinations and
the corresponding functions. The following commands are for use with keypad controllers:
Messoa-P, Messoa-D, Pelco P, Pelco D, Bosch, and Ernitec protocol.
Key Press Function
0~32, 35~66, 111~255+Preset Move camera to preset point 0~32, 35~66, 111~255
33+Preset Flip
34+Preset Return to origin
70+Preset Begin auto patrol – Group 1
90+Preset Begin auto patrol – Group 2
91+Preset Begin auto patrol – Group 3
92+Preset Begin auto patrol – Group 4
71+Preset Backlight compensation ON
72+Preset Backlight compensation OFF
73+Preset White balance – one push
74+Preset Focus – one push
75+Preset Show software version
76+Preset Self test
88+Preset Color mode (daytime)
89+Preset Monochrome mode (nighttime)
96+Preset Stop scan
97+Preset Begin random scan
98+Preset Begin frame scan
99+Preset Begin auto scan
101+Preset Run Pattern Tour-Group 1
102+Preset Run Pattern Tour-Group 2
103+Preset Run Pattern Tour-Group 3
104+Preset Run Pattern Tour-Group 4
105+Preset Stop Pattern Tour-record
0~32 35~66 111~255+ Set Preset Configure preset point 0~32, 35~66, 111~255
83+Set Preset Enter privacy zone setup mode
90+Set Preset Set manual left limit
91+Set Preset Set manual right limit
92+Set Preset Set scan left limit
93+Set Preset Set scan right limit
95+Set Preset Open menu screen
101+Set Preset Start pattern tecord -Group 1
102+Set Preset Start pattern tecord -Group 2
103+Set Preset Start pattern tecord -Group 3
104+Set Preset Start pattern tecord -Group 4
*123+ Preset – unavailable *
*only 211 points can be preset and there are 20 points preserved for future use such
as 67~69, 77~82, 84~87, 94, 100, 106~110*