Messoa NIC910/930/950HPro, Инструкция по эксплуатации, Страница: 32 / 68

32
OPERATION INSTRUCTIONS
Set the Tilt Angle:
1. Press the key to enter the main menu screen.
2. Move the cursor to <OTHERS>, and then press the key to enter
<OTHERS> menu.
3. Move the cursor to the SCAN TILT ANGLE selection and then press the
key to enter.
4. Move the joystick up/down to set tilt angle (0~92°).
5. Press the key to confirm selection, or press the key to cancel
selection and exit from the menu screen.
6.8.3 SCHEDULE:
Main menu <OTHERS> menu <SCHEDULE> menu
<MOTION DETECTION>
Four sets of schedules can be configured with individual start time, end time, and
action mode. The actions include preset(0~32), auto scan, auto patrol 1~4, frame
scan, and random scan modes.
Set a Schedule:
1. Press the key to enter the main menu screen.
2. Move the cursor to <OTHERS>, and then press the key to enter <OTHERS>
menu.
3. Move the cursor to <SCHEDULE>, and then press the key to enter the
<SCHEDULE> menu.
4. Move the cursor to WEEK and then press the key. Use the joystick up/down
to select the week and press the key to confirm the selection and quit.
5. Move the cursor to ENABLE and press the key to enter the option. Use
the joystick up/down to set ON or OFF.
6. Press the key to set the start time, end time, and status options.
7. Move the joystick up/down to make the selection.
8. Press the key to confirm selection, or press the key to cancel
selection and exit from the menu screen.
Note:
1.The Start and End time setup is by the unit of hours.
For example, set 0 -> 1 means from 00:00 to 01:59, 2 hours in total.
2. When a schedule mode is ON and within the schedule time interval, the
dome will still perform scheduling after power up from abnormal power lost;
regardless of the setting for power on Menu.