Messoa NIC910/930/950HPro, Инструкция по эксплуатации, Страница: 23 / 68

23
OPERATION INSTRUCTIONS
3. Move the cursor to the SCAN LIMIT STOPS selection and then press the key to
enter.
4. Move the joystick up/down to choose ON or OFF.
5. Press the key to confirm selection, or press the key to cancel
selection and exit from the menu screen.
Set the Scan Range:
1. Activate the scan range (SCAN LIMIT STOP = ON) and then exit the menu.
2. Set the left limit: use the joystick and move the camera to the left limit posi-
tion, then press number key “92” + hold the key for 2 seconds. The
screen will show: SCAN LEFT LIMIT, and the left limit will be set.
3. Set the right limit: use the joystick and move the camera to the right limit posi-
tion, then press number key “93” + hold the key for 2 seconds. The
screen will show: SCAN RIGHT LIMIT, and the right limit will be set.
6.5.4 MANUAL Scan Range:
When using the joystick to control the horizontal panning, the camera will stop
panning once it reaches the MANUAL LIMIT STOPS. The scan limit can be
configured as left and right limit.
Main Menu <PAN/TILT SETUP> menu
Activate the Manual Scan Range:
1. Press the key to enter the main menu screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the key to
enter <PAN/TILT SETUP> menu.
3. Move the cursor to the MANUAL LIMIT STOPS selection and then press the
key to enter.
4. Move the joystick up/down to choose ON or OFF.
5. Press the key to confirm selection, or press the key to cancel
selection and exit from the menu screen.
Set the Manual Scan Range:
1. Activate the manual scan range (MANUAL LIMIT STOP = ON) and then exit the menu.
2. Set the left limit: use the joystick and move the camera to the left limit
position, then press number key “90” + hold the key for 2 seconds.
The screen will show: MANUAL LEFT LIMIT, and the left limit will be set.
3. Set the right limit: use the joystick and move the camera to the right limit