21
OPERATION INSTRUCTIONS
ALARM 2
ALARM 1
DELAY TIME
When using the infrared projector:
When using the infrared illuminations during nighttime as an auxiliary light source,
the infrared activation signal can be connected to the alarm input port and set the
alarm action to BW mode. This will prevent the constant switching between color and
monochrome images caused by the strength of the external light source, as well as
improve sensitivity and avoid image shaking.
MOTION Detection:
The camera features motion detection capabilities and is similarly configured as
the alarm setup.
Note:
Motion function is selectable: PATH/BW/Preset point/OFF action. When camera
set in Path action, the camera would track the moving objective.
6.5 Horizontal Pan/Vertical Tilt Setup:
6.5.1 Auto Flip
The auto flipping function will enable the camera to quickly flip 180° in the vertical
direction. Objects moving under the camera can be tracked without interruption.
Main Menu
<PAN/TILT SETUP> menu
Activate 180° Auto Flip:
1. Press the
key to enter the main menu screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the
key to
enter <PAN/TILT SETUP> menu.
3. Move the cursor to the AUTO FLIP selection and then press the
key to
enter.
4. Move the joystick up/down to choose ON or OFF.
Содержание NIC910/930/950HPro
