-14-
U.motion Client Touch 7
Technical Manual
U.motion Client Touch 7 offers all the languages contained in the Android repertoire. Nevertheless, the
U.motion applications are currently limited to the languages German, Italian and English. If another language
is selected, those applications will be shown in English.
The date and time settings can be configured as well manually as also automatically via network and are
necessary if you want to use the Play Store. It is recommended to use the manual configuration, since
Android limits the synchronization on mobile networks not present on U.motion Client Touch 7.
The next entry deals with the network settings of U.motion Client Touch 7:
U.motion Client Touch 7 supports as well the use of a static IP address as also the usage of DHCP. Depending
on your network, these parameters must be configured correctly in order to connect U.motion Client Touch 7
with your network and also with the internet (check out the screenshot in the middle, which shows the
configuration menu for the LAN port). If you are unsure about the correct configuration, please refer to your
network administrator.
This menu also shows the current IP address of the U.motion Client Touch 7.
Note
: When the connection has been established correctly, in the upper right corner of this
configuration page a green symbol showing 2 PCs will be shown. Only when this symbol is active,
the U.motion Client Touch 7 is correctly connected to your network.
The next 2 settings refer to the control of the RGB-LED of the U.motion Client Touch 7. The first option
permits to use the blue LED as orientation LED. When the checkbox is enabled, the LED will be continuously
on and can be seen as operating LED or as orientation LED by night.
The second option instead handles the control of the red LED and uses it to signal the current network state.
If U.motion Client Touch 7 is not connected to a network and the checkbox of this option is enabled, the red
LED will be turned on. As soon as the device connects to the network, the LED will turn off. Therefore, the
option „Network-Check LED“ acts in the same way as the symbol of the network connection described in the
note above. Naturally, by disabling the corresponding checkbox, also this functionality can be disabled.
