-8-
U.motion Client Touch 7
Technical Manual
B3. Installing the U.motion Client Touch 7
Mounting U.motion Touch 7 Mounting set
The mounting set may be installed in a cut out in the wall, in a wooden structure thick at least 1,5 cm or in a
cavity wall construction. The cut out has to respect the sizes specified in the technical data and has to be at
least 8 cm deep.
In the wall cut out, the mounting set can become build in while it can be screwed on in a piece of furniture or
in a cavity wall (thanks to the additional wooden mounting adapters). It is important that the fore edge of the
mounting set is flat and horizontally to the surface of the wall or the piece of furniture.
The mounting set offers cable access at all four sides.
Note: detailed information about the mounting can be found in the documentation of the
corresponding mounting set (attached to the mounting set and present on the U.motion USB stick)
Installing U.motion Client Touch 7
Switch off the system/plant supply voltage. Connect the power and controlling cables. After the correct
cabling and connecting the magnet, the U.motion Client Touch 7 is put into the wall mount box and is fixed
with the screw included in the packing. Now, you can install your U.motion Touch 7 Design element with
slight, even pressure.
Caution!
Unauthorized changes or modifications to the U.motion Client Touch 7 configuration may result in
permanent damage to the system or its functionality. Only authorized trained personnel are allowed
to make any modifications.
Caution!
If you need to remove the U.motion Touch 7 Design element, extract it from the mounting
horizontally. One-sided traction or slanted installing can damage the frame.
Caution!
In order to be able to dissipate the warmth produced by the equipment, it must be guaranteed, that
the ambient temperature does not exceed 30°C. If this value is exceeded, additional cooling has to
be provided.
The equipment must be installed vertically, i.e. the front plate must be in an angle of 90° to the base
plate. Installation has to be conform to HD 60364-4-41 or other national prescriptions.
C.
O
PERATING
S
YSTEM
U.motion Client Touch 7 is delivered with the Android operating system in version 2.3.4. This operating
system, used on countless smartphones and tablets, thanks to the Open Source technology offers nearly
ungated capabilities as well as numerous usage possibilities dues to the availability of manufacturer-specific
applications. General information about the Android operating system can be found under
www.android.com
.
