-25-
U.motion Client Touch 7
Technical Manual
The internal units will show the following parameters:
-
VoIP ID:
This value must match the VoIP-ID (username) of the internal unit,
as configured within the VoIP Server
-
Display name:
Optionally a display name can be specified, which is shown in the status bar
during incoming calls of the corresponding number (overwrites eventual
values sent by the VoIP Server)
-
QuickDial button:
If this checkbox is enabled, the dial window (check out page 11) will show a
corresponding QuickDial button with the VoIP ID (or the display name, if
previously configured), which permits to call the internal unit directly
-
Image file:
Optionally a picture can be defined, which will be shown at incoming calls of
the selected internal unit; it is possible either to select a local picture file or
to specify the URL of an image in the world wide web
-
Ringtone:
Optionally a separated ringtone can be selected, which will be played
at incoming calls of the selected internal unit
Every external unit instead shows the following parameters:
-
Type:
The type of the external unit can be selected through a selection popup
-
VoIP ID:
This value must match the VoIP-ID (username) of the external unit,
as configured within the VoIP Server
-
Display name:
Optionally a display name can be specified, which is shown in the status bar
during incoming calls of the corresponding number (overwrites eventual
values sent by the VoIP Server)
-
Ringtone:
Optionally a separated ringtone can be selected, which will be played
at incoming calls of the selected external unit
-
Main camera - IP:
In this field the IP address of the camera of the external unit, which should
be shown automatically during an incoming call, has to be inserted
-
Add. camera – path:
Optionally the path of a 2. video signal (either image- or video-path) can be
specified. In the main window it will then be possible to change between
main and additional camera using horizontal swipe gesture
-
QuickDial button:
If this checkbox is enabled, the dial window (check out page 11) will show a
corresponding QuickDial button with the VoIP ID (or the display name, if
previously configured), which permits to call the external unit directly
The screenshots on the following page show the configuration sub menu of the external units as well as the
selection popup of the type of the external unit:
