-31-
U.motion Client Touch 7
Technical Manual
C6 Recovery:
The package contents of the U.motion Client Touch 7 also contain a microSD card with pre-loaded recovery
system. Using this accessory, you can bring back U.motion Client Touch 7 to factory defaults within short
time. Furthermore, using this microSD it is also possible to load new versions of the Android image to the
device.
The recovery process is done by following the steps below:
1.
Remove the power supply from the U.motion
Client Touch 7
2.
Remove the U.motion Touch 7 Design element on
the front and insert the recovery SD into the
microSD slot of the device
3.
Reattach the U.motion Client Touch 7 to the
power supply; after approximately 10 seconds you
should see the recovery screen shown on the
right.
4.
As described in the screen, please press the HOME
button of the U.motion Client Touch 7 and wait
until the procedure is complete. The recovery
process is done completely automatically and
doesn’t require your further intervention. The
RGB-LEDs will show the current state of the
recovery process. Downstanding table informs
about the meaning of the LEDs.
5.
At completed recovery procedure, the U.motion
Client Touch 7 will shut down automatically and
the display will remain dark. Please power off the
U.motion Client Touch 7, remove the recovery SD
and reboot the device. Now the image with
factory reset should load correctly.
Meaning of the LEDs during the recovery process:
Step
RED
GREEN
BLUE
Description
1
On
Off
Off
Creation partition table of internal storage
2
Off
On
Off
Formatting of internal storage
3
Off
Off
On
Installation boot file system
4
On
On
Off
Installation Android operating system
ERROR
On
Off
On
No recovery image found on microSD!
