14
Changing Solution Containers
Removing an Empty Container
1
To remove an empty container, simply loosen the cap on the 2 ½ gallon container and
remove the tube assembly from the empty container.
DISPOSE OF CONTAINER
ACCORDING TO LOCAL, STATE, AND FEDERAL REGULATIONS AND DO NOT REFILL USED
CONTAINERS.
Installing a New Container
The solution containers can be installed quickly and easily. Each case of solutions contains two
solution tube assemblies (each assembly consists of a cap, tube barb with tube). Follow these steps
for all installations:
1.
Unscrew the protective cap from the new 2 ½ gallon solutions container and discard.
2.
Place the new container in the system.
3.
Install the pickup tube assembly from the system into the new container and tighten cap.
4.
After installing the new solutions container, run 5 handwashes to re-prime the solutions line.
FOR FURTHER ASSISTANCE CHANGING THE SOLUTIONS CONTAINERS, REFER TO THE SOLUTIONS
REPLACEMENT DIAGRAM LOCATED ON PAGE 14 OF THIS MANUAL.
