background image

27 

 

  
Terms & Conditions of Sale 
 

Standard Terms and Conditions of Sale For Customers 

 

SCOPE: 

These Terms and Conditions apply to all sales made by Meritech Systems, LLC (“Meritech”), and its Meritech Division. These Terms and 

Conditions apply in lieu of any course of dealing between the parties or usage of trade in the industry. 

 

TERMS:

 

Buyer agrees to pay for the products, including all component parts, specified on this invoice (the “Product”) in accordance with the payment terms specified on 

this invoice. In the event Buyer fails to make any payment to Meritech when due, Buyer’s entire account(s) with Meritech shall become immediately due and payable without 
notice or demand. All past due amounts shall bear interest from the due date until paid at a rate of 18% per annum. If Buyer fails to pay any amounts outstanding within 10 
days of such due date, Meritech may elect to enter Buyer’s principal place of business and any other location where the Product is located and remove the Product. The 
costs of such removal shall be borne solely by Buyer, and Buyer shall indemnify Meritech and hold Meritech harmless from any damages or other liabilities arising from such 
removal. The foregoing remedies are in addition to, and not a substitute for, any other remedies provided for herein or that may otherwise be available to Meritech. 

SHIPMENTS:

 All products are shipped F.O.B., point of shipment unless otherwise agreed to in writing by Meritech. Risk of loss shall transfer to the Buyer upon tender of 

goods to Buyer, Buyer’s representative, or common carrier. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added 
to the amount of the order. If Buyer causes or requests a shipment delay, or if Meritech ships or delivers the products erroneously as a result of inaccurate, incomplete or 
misleading information supplied by Buyer or its agents or employees, storage and all other additional costs and risks shall be borne solely by Buyer. Claims for products 
damaged or lost in transit should be made by Buyer to the carrier, as Meritech’s responsibility ceases upon tender of goods to Buyer, Buyer’s representative or common 
carrier.

  

INSPECTION AND ACCEPTANCE:

 Claims for damage, shortage or errors in shipping must be reported within three days following delivery to Buyer. Buyer shall have 7 

days from the date Buyer receives the Product to inspect the Product for defects and nonconformance that are not due to damage, shortage or errors in shipping and notify 
Meritech, in writing, of any defects, nonconformance or rejection of the Product. After such 7 day period, Buyer shall be deemed to have irrevocably accepted the Product 
and these Terms and Conditions. After such acceptance, Buyer shall have no right to reject the Product for any reason or to revoke acceptance, or to dispute any of these 
Terms and Conditions. Buyer hereby agrees that such 7 day period is a reasonable amount of time for such inspection and revocation of the Product. Buyer shall have no 
right to order any change or modification to the Product or service previously ordered by Buyer or its representatives. Specially fabricated or ordered items may not be 
returned, and no refund will be made. The sole and exclusive remedy for any alleged defect in workmanship or material will be the replacement of the Product subject to 
Meritech’s inspection and limited warranty. 

TAXES:

 Buyer shall be liable for the payment of all transaction based taxes including without limitation sales, use, gross receipts, compensating, occupation, privilege, 

excise or other similar taxes assessed in connection with the purchase and sale of the Product by payment of such taxes to Meritech, or by executing and delivering to 
Meritech a tax exemption certificate or in those jurisdictions where Meritech is not required to administer the laws and regulations of such jurisdiction, a tax indemnification 
agreement. Any such tax exemption certificate or tax indemnification agreement shall be in form 

and substance acceptable to Meritech, in Meritech’s sole discretion. 

Meritech shall have no obligation to pay any taxes, which are Buyer’s sole responsibility. 

SECURITY INTEREST

Buyer hereby grants Meritech, to secure the payment and performance in full of the purchase price for the Product, plus any fees owed hereunder, 

a continuing security interest in, and pledges to Meritech, the Product (the “Collateral”), wherever located, whether now owned or hereafter acquired or arising, and all 
proceeds thereof. Buyer represents, warrants, and covenants that the security interest granted herein is, and shall continue to be, a first priority perfected security interest in 
the Collateral so long as any portion of the purchase price and fees rema

ins unpaid. Meritech’s security interest in the Collateral shall continue until the purchase price and 

fees have been paid in full. Upon such payment in full, Meritech shall release its security interest in the Collateral and all rights therein shall revert to Buyer. Buyer hereby 
authorizes Meritech to file financing statements, without notice to Buyer, in all appropriate jurisdictions that, in Meritech

’s sole judgment, are reasonably necessary to perfect 

or protect Meritech’s interest or rights hereunder. 

TITLE:

 Title to the Product shall remain with Meritech until Buyer has paid the entire purchase price and any fees owed hereunder. 

LIMITED WARRANTY:

 

Meritech makes no warranties with respect to the Product other than those expressly provided in Meritech’s Limited Warranty available on its 

website at www.meritech.com. 

INDEMNIFICATION:

 Buyer agrees to protect, indemnify, hold harmless and defend Meritech and its members, managers, officers, affiliates, agents and employees 

against any and all losses, damages, claims, lawsuits, demands, causes of action, judgments, liabilities and expenses (includ

ing attorneys’ fees and related costs) for injury 

to or death of any persons (including without limitation Buyer, Buyer’s customers, Buyer’s employees and agents, or any employee or agent of them, Buyer’s co-venturers, 
contractors, subcontractors and suppliers) or damage to or loss of any property or the environment, or violation of any applicable laws or regulations arising in any manner, 
directly or indirectly, out of or in connection with, or in the course of or incidental to any of Buyer’s use, application or operation of the Product, regardless of cause or of any 
fault or negligence of Meritech or Meritech’s agents. 

FORCE MAJEURE:

 

The obligations of Buyer and Meritech shall be suspended and neither shall be liable for any damages suffered by the other if the failure of Buyer or 

Meritech to perform arises from an event of Force Majeure. An “event of Force Majeure” includes acts of God, weather or other action of the elements, warlike action, 
insurrection, revolution, civil strife, piracy, civil war, hostile action, strikes or other labor stoppages, acts of public enemies or material changes to state, federal or local laws, 
rules or regulations. Lack of funds or financial resources shall not be considered an event of Force Majeure. 

REPRESENTATIONS AND WARRANTIES OF BUYER:

 Buyer represents and warrants to Meritech that (a) the information set forth on this invoice accurately 

repre

sents (i) Buyer’s exact legal name; (ii) Buyer’s form of organization and jurisdiction of organization; (iii) Buyer’s principal place of business or executive offices and, if 

different, mailing address; and (iv) all other information set forth in this invoice pertaining to Buyer is accurate and complete, and (b) Buyer has sufficient financial resources 
to pay its debts and other financial obligations (including trade debts) as they come due, including the obligation to pay the purchase price and any fees owed hereunder to 
Buyer. 

COVENANTS

; So long as any portion of the purchase price or fees payable to Meritech hereunder remain unpaid, (a) Buyer shall not, without at least 30 days prior written 

notice to Meritech: (i) change its jurisdiction of organization, (ii) change its organizational structure or type, (iii) change its legal name, or (iv) change its tax identification 
number or other organizational number (if any) assigned by its jurisdiction of organization, (b) Buyer shall maintain the Product and keep the Product in good repair and 
working condition, and (c) Buyer shall not convey, sell, lease, transfer or otherwise remove the Product from Buyer’s facilities, without the prior written consent of Meritech. 

DEFAULT:

. Meritech may enter Buyer’s principal place of Business upon prior written notice, and any amounts outstanding as of the date thereof, including without 

limitation, accrued interest, shall become immediately due and payable if Buyer (a) breaches any covenant, obligation, or warranty specified herein, (b) fails to make any 
payment due hereunder or pay any other obligations after such obligations are due and Meritech has provided Buyer with notice of such default, (c) becomes insolvent, 
enters into bankruptcy or a receiver is appointed in respect of any of its business or Buyer makes an assignment for the benefit of creditors, or (d) breaches any other 
provision of these Terms and Conditions. 

ENFORCEMENT: 

The exclusive forum for adjudication of any controversy or dispute relating to the interpretation of or performance under or any matter relating to these 

Terms and Conditions or the Product shall be the state or federal courts located in the City and County of Denver, Colorado. Buyer waives any objection which it may now or 
hereafter have to such venue of any such action, suit or proceeding or any claim of forum non conveniens, and irrevocably submits itself to the nonexclusive jurisdiction of 
any such state or federal court for the purposes of any such action, suit or service proceeding. 

WAIVER:

 Any waiver by Meritech of these Terms and Conditions or any defaults hereunder shall not constitute a waiver of the remaining Terms and Conditions or of any 

partial invalidity or unenforceability, and no failure or delay in exercising any right hereunder shall operate as a waiver thereof. 

SEVERABILITY:

 

If any provision hereof is held to be illegal, invalid or unenforceable under any present or future laws, such provision shall be fully severable and the terms 

and conditions herein shall be construed and enforced as if such illegal, invalid or unenforceable provision had never been made a part hereof. The remaining provisions 
herein shall remain in full force and effect and shall not be affected by such illegal, invalid or unenforceable provisions or by their severance here from. 

GOVERNING LAW:

 This transaction shall be governed in all respects by the laws of the State of Colorado, without regard to its conflict of laws provisions. THE U.N. 

CONVENTION OF CONTRACTS FOR THE INTERNATIONAL SALES OF GOODS SHALL NOT GOVERN NOR APPLY TO ANY MATTERS ADDRESSED HEREIN OR 
RELATED HERETO. 

SUCCESSORS AND ASSIGNS:

 These Terms and Conditions and everything herein contained shall inure to the benefit of and be binding upon Buyer, Meritech and each 

of their heirs, executors, administrators and permitted successors and assigns. 

ENTIRE AGREEMENT:

 This document constitutes the entire, complete, and exclusive agreement between Buyer and Meritech with respect to the subject matter hereof. 

All prior proposals, negotiations and representations, if any, including any purchase orders or written quotes, that are different from or in addition to the terms and conditions 
herein are hereby rejected and shall not be binding on Meritech.  

 

Содержание CleanTech 500EZ




























Отзывы: