7
Facility Installation Instructions/Requirements
The CleanTech 2000S
system should be installed per the instructions within its separate installation /
operation manual.
This
manual gives detailed instructions on the installation, operation, & cleaning
of the Boot Sanitizing Pan.
Do not hardwire the system electrical cord without having a way to
disconnect the system from electrical source for future serviceability of the system.
A floor drain is
required for the Boot Sanitizing Pan to function properly. Do not hard pipe the drain fittings as this
prevents easy removal and cleaning of the pan.
1.
Install the 2000S system per its installation instructions.
2.
Unpack the boot pan and place in front of the 2000S per the photo below.
3.
Make certain that the pan is sitting level and does not rock.
4.
Pull the pan away from the system and attach the two drain hoses,
one to each of the ¾” male
pipe threads on the back of the pan drain box. See photos below, on next page.
