9
7.
Push the Boot Sanitizing Pan into the system, making certain the 2 tabs are on the inside legs
of the CleanTech 2000S system. See Photo Below.
8.
Once pan is in place make certain the 2 drain hoses are directed towards the floor drain, and
that they are flat to prevent the pan from overflow
ing.
Consult local and national codes: conformity and compliance to local and national codes is the
responsibility of the installer.
The CleanTech 4000S
system should be installed per the instructions within its separate installation /
operation manual. This manual gives detailed instruction on the installation, operation, & cleaning of
the Boot Sanitizing Pan.
Do not hardwire the system electrical cord without having a way to
disconnect the system from electrical source for future serviceability of the system.
A floor drain is
required for the Boot Sanitizing Pan to function properly. Do not hard pipe the drain fittings as this
prevents easy removal and cleaning of the pan.
The 4000S Boot Sanitizing Pan install is done in the same manner as the 2000S instructions listed
above, just that there are 3 independent pans. There is a left, center, & right pan. The left and right
are easily distinguished as they have a sloped ramp respectfully on the left and right sides of the pan.
See photo on page 6 of this manual.
