13
4.
Disconnect the 2 drain hoses. See photo above.
5.
Pan can now be removed from system and cleaned.
6.
Remove boot mat and hose down to remove soils and debris.
7.
Hose down entire inside top, bottom, sides, and pan drain to remove soils and debris.
Depending on soils encountered in the facility, degreasers or other chemicals may need to be
used on the pan to keep it clean and to remove or prevent biofilms.
8.
Sanitize all pan surfaces and follow standard sanitizing chemical instructions.
9.
Once the cleaning procedure has been completed per the instructions above, re-assemble the
pan per the instructions in this manual.
10.
Re-prime the pan per the instructions in this manual.
11.
Inspect and clean water inlet fittings as needed.
Contact Meritech Customer Service for additional assistance on cleaning assistance or instruction on
any systems manufactured by Meritech.
Contacting Meritech
If you have questions about the general use of the CleanTech® systems, need installation or trouble
shooting assistance, or need to purchase additional solution for your system contact us below.
Meritech Systems, LLC
720 Corporate Circle, Suite K
Golden, CO 80401 USA
Phone :( 800) 932-7707
Fax :( 303) 790-4859
E-mail:
THE CleanTech FAMILY OF SYSTEMS HAS BEEN DESIGNED TO OPERATE SPECIFICALLY
WITH THE SOLUTIONS PROVIDED OR APPROVED BY MERITECH. THEY ARE OF A
SPECIFIC CONCENTRATION AND VISCOSITY. WE CANNOT GUARANTEE SATISFACTORY
PERFORMANCE NOR WARRANTY THE SYSTEM IF THE CONTAINERS ARE FILLED WITH
A DIFFERENT SOLUTION. IN ADDITION, THERE IS ALSO A RISK OF INTRODUCING
CONTAMINANTS WHICH WILL BE INCOMPATIBLE WITH THE SYSTEM.
