Mercury MerCruiser Axius SeaCore 350 MAG Скачать руководство пользователя | Manualshive

Страница: 44 / 170

background image

Section 2 - Getting to Know Your Power Package

Page 36

90-8M0050539

eng

MAY 2011

Press the "SYNC" button on the CAN trackpad to turn auto synchronization on or off. When the sync LED is yellow, the "SYNC"

button has been pressed, but the conditions are not right for auto synchronization to engage. When the sync LED turns red, engine

synchronization has been engaged. The engines will remain synchronized as long as engine speed is over 900 RPM for two

seconds, remote control handles are positioned within 10% of each other, and the engines are below 95% throttle opening.
To disengage the auto synchronization feature, press the "SYNC" button.

SYNC

1 LEVER

NEUTRAL

TROLL

THROTTLE
ONLY

DOCK

TRANSFER

+

-

22590

Helm Transfer

!

WARNING

Avoid serious injury or death from loss of boat control. The boat operator should never leave the active station while engine is

in gear. Helm transfer should only be attempted while both stations are manned. One‑person helm transfer should only be

performed while engine is in neutral.

NOTE: Neutral position is preferred when doing a station transfer. If conditions do not allow the remote control to be placed in the

neutral position, a helm transfer can be done while in gear.

The helm transfer function allows the boat operator to select which helm is in control of engine operation. Pressing the

"TRANSFER" button two times allows engine control to be transferred to a new helm. When a helm transfer is initiated, the control

will automatically start adjusting engine RPM and gear position to match the control handle setting at the new helm. Adjust the

control handles to the desired throttle and gear position.
Once the "TRANSFER" button is pressed, the transfer LED will light up and one beep will sound. Press the "TRANSFER" button

again to complete the helm transformation. When helm transformation is complete, another beep will sound and the transfer LED

will turn off.

NOTE: There is a 10 second time frame to complete a helm transfer. If the helm transfer is not completed, the action will be

cancelled and a double beep will sound. Pressing the "TRANSFER" button again will reinitiate a helm transfer.

SYNC

1 LEVER

NEUTRAL

TROLL

THROTTLE
ONLY

DOCK

TRANSFER

+

-

22593

Synchronizing Helms Prior to Transfer

Pressing the "TRANSFER" button allows the boat operator 10 seconds to match up the control handle settings at the new helm

with the handle settings that are at the old (to be inactive) helm. If the handles are not matched, the neutral lights will flash. The

light blinks faster as the handles are nearing match position. Once the light stays on continuously, the handles are matched and

the button can be pressed again to complete the transfer. This completes the transfer process, and gives control to the new station.

If the helm transfer is not completed within 10 seconds, the action will be cancelled.

«
...
42
43
44
45
46
...
»

Содержание MerCruiser Axius SeaCore 350 MAG











































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MerCruiser Axius SeaCore 350 MAG

Бренд: Mitsubishi Страницы: 176

HOME MOTION Roll Up 28 WT

Бренд: SOMFY Страницы: 10

Бренд: MSW Страницы: 159

Lombardini SILEO 1000

Бренд: Kohler Страницы: 168

Бренд: TOHATSU Страницы: 292

Бренд: Nederman Страницы: 44

Бренд: Leadshine Technology Страницы: 11

iSV2-CAN Series

Бренд: Leadshine Страницы: 107

Бренд: Texas Equipment Страницы: 38

Бренд: Texas Equipment Страницы: 57

Бренд: Texas Equipment Страницы: 60

Бренд: Honda Страницы: 48

Бренд: Honda Страницы: 80

Бренд: Volvo Penta Страницы: 122

130000 950 Series

Бренд: Briggs & Stratton Страницы: 100

Бренд: ZIEHL-ABEGG Страницы: 6

3.5-1200 - V1.8

Бренд: MVVS Страницы: 2

Бренд: Mitsubishi Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды