Mercury MerCruiser Axius SeaCore 350 MAG, Руководство пользователя

Страница: 140 / 170

Section 6 - Storage
Page 132 90-8M0050539
eng
MAY 2011
11. Mercury MerCruiser recommends leaving the drain system open while transporting the boat or while performing other
maintenance. This helps ensure that all water is drained.
12. Before launching the boat, pull up on the manual release valve. Verify that the green indicators are no longer extended.
a - Green indicators
Manual Single‑Point Drain System (Alpha)
Boat in the Water
1. Close the seacock (if equipped) or remove and plug the water inlet hose.
2. Rotate the blue handle counterclockwise until it stops (approximately two turns). The red on the handle shaft indicates that
the drain system is open. Do not force the handle as this will create new threads.
3. Immediately remove the blue drain plug from the side of the thermostat housing. This must be removed within 30 seconds to
properly vent the cooling system.
a - Blue handle
b - Blue drain plug location
4. Visually verify that water is draining. If water does not drain, remove the blue drain plug from the distribution housing and
drain manually.
a - Blue drain plug
b - Drain location ‑ orange or red
a
6135
a
b
6136
a
b
33152