Mercury MerCruiser Axius SeaCore 350 MAG Скачать руководство пользователя

Страница: 13 / 170

Section 1 - Warranty

90-8M0050539

eng

MAY 2011

Page 5

Termination of Coverage

Warranty coverage is terminated for used product obtained in any of the following ways:

•

Repossession from a retail customer

•

Purchase at auction

•

Purchase from a salvage yard

•

Purchase from an insurance company that obtained the product as a result of an insurance claim

Conditions That Must Be Met in Order to Obtain Warranty Coverage

Warranty coverage is available only to retail customers that purchase from a dealer authorized by Mercury Marine to distribute the

product in the country in which the sale occurred, and then only after the pre‑delivery inspection process specified by Mercury

Marine is completed and documented. Warranty coverage becomes available upon proper registration of the product by the

authorized dealer. Inaccurate warranty registration information regarding recreational use or subsequent change of use from

recreational to commercial (unless properly reregistered) may void the warranty at the sole discretion of Mercury Marine. Routine

maintenance must be performed according to the maintenance schedule in the Operation, Maintenance & Warranty manual in order

to obtain warranty coverage. Mercury Marine reserves the right to make any warranty coverage contingent upon proof of proper

maintenance.

What Mercury Marine Will Do

Mercury Marine's sole and exclusive obligation under this warranty is limited to, at our option, repairing a defective part, replacing

such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the Mercury Marine

product. Mercury Marine reserves the right to improve or modify products from time to time without assuming an obligation to modify

products previously manufactured.

How to Obtain Warranty Coverage

The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for

warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized to

service the product. If the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury Marine.

Mercury Marine will then arrange for the inspection and any covered repair. The purchaser in that case shall pay for all related

transportation charges and travel time. If the service provided is not covered by this warranty, the purchaser shall pay for all related

labor and material and any other expenses associated with that service. The purchaser shall not, unless requested by Mercury

Marine, ship the product or parts of the product directly to Mercury Marine. Proof of registered ownership must be presented to the

dealer at the time warranty service is requested in order to obtain coverage.

Содержание MerCruiser Axius SeaCore 350 MAG











































































































































































Результаты поиска

Содержание MerCruiser Axius SeaCore 350 MAG

Отзывы:

Похожие инструкции для MerCruiser Axius SeaCore 350 MAG

Бренды по названию

Популярные бренды

Mercury MerCruiser Axius SeaCore 350 MAG, Руководство пользователя

Результаты поиска

Содержание MerCruiser Axius SeaCore 350 MAG

Отзывы:

Похожие инструкции для MerCruiser Axius SeaCore 350 MAG

Бренды по названию

Популярные бренды