manualshive.com logo in svg

Mercury Inboard 5.7L, Руководство пользователя

Поделиться
Скачать
Mercury Inboard 5.7L Скачать руководство пользователя страница 38

On The Water 

Page  30

90-860174050   JUNE  2005

Conditions Affecting Operation

Weight Distribution (Passengers and Gear) Inside the Boat

Shifting weight to rear (stern):
• Generally increases speed and engine RPM
• Causes bow to bounce in choppy water
• Increases danger of following wave splashing into the boat when coming off plane
• At extremes, can cause the boat to porpoise
Shifting weight to front (bow):
• Improves ease of planing
• Improves rough water ride
• At extremes, can cause the boat to veer back and forth (bow steer)

Bottom Of Boat

To maintain maximum speed, the boat bottom should be:
• Clean, free of barnacles and marine growth
• Free of distortion; nearly flat where it contacts the water
• Straight and smooth, fore and aft
Marine vegetation may accumulate when the boat is docked. This growth must be removed

before operation; it may clog the water inlets and cause the engine to overheat.

Cavitation

Cavitation occurs when water flow cannot follow the contour of a fast‑moving underwater

object, such as a gear housing or a propeller. Cavitation permits the propeller to speed up,

but the boat speed to reduce. Cavitation can seriously erode the surface of the gear housing

or the propeller. Common causes of cavitation are:
• Weeds or other debris snagged on the propeller
• Bent propeller blade
• Raised burrs or sharp edges on the propeller

Elevation And Climate

Elevation and climate changes will affect the performance of your power package. Loss of

performance can be caused by:
• Higher elevations
• Higher temperatures
• Low barometric pressures
• High humidity
For you to have optimum engine performance under changing weather conditions, it is

essential that the engine be propped to allow the engine to operate at or near the top end

of the specified maximum RPM range with a normal boat load during your normal boating

weather conditions.
In most cases, recommended RPM can be achieved by changing to a lower pitch propeller.

Содержание Inboard 5.7L



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды