Mercury Inboard 5.7L Скачать руководство пользователя страница 1

Страница: 1 / 82

Gasoline Engines - Inboard/Tow Sport Models

90-860174050 605

Identification Record

Please record the following information:

Engine Model and Horsepower

Engine Serial Number

Transom Assembly Serial Number (Sterndrive)

Gear Ratio

Sterndrive Unit Serial Number

Transmission Model (Inboard)

Gear Ratio

Transmission Serial Number

Propeller Number

Pitch

Diameter

Hull Identification Number (HIN)

Purchase Date

Boat Manufacturer

Boat Model Length

Exhaust Gas Emissions Certification Number

The serial numbers are the manufacturer’s keys to numerous engineering details

that apply to your Mercury MerCruiser® power package. When contacting your

Authorized Mercury MerCruiser Dealer about service, always specify model and

serial numbers.
The description and specifications contained herein were in effect at the time this

guide was approved for printing. Mercury Marine, whose policy is one of continuous

improvement, reserves the right to discontinue models at any time, or to change

specifications or designs, without notice and without incurring obligation.
Mercury Marine, Fond du Lac, Wisconsin, U.S.A. Printed in U.S.A.
©2005, Mercury Marine
Mercury, Mercury Marine, MerCruiser, Mercury MerCruiser, Mercury Racing,

Mercury Precision Parts, Mercury Propellers, Mariner, Quicksilver, #1 On The Water,

Alpha, Bravo, Pro Max, OptiMax, Sport‑Jet, K‑Planes, MerCathode, RideGuide,

SmartCraft, Zero Effort, M with Waves logo, Mercury with Waves logo, and

SmartCraft logo are all registered trademarks of Brunswick Corporation. Mercury

Product Protection logo is a registered service mark of Brunswick Corporation.

Welcome

You have selected one of the finest marine power packages available. It incorporates

numerous design features to assure operating ease and durability.
With proper care and maintenance, you will thoroughly enjoy using this product for

many boating seasons. To ensure maximum performance and carefree use, we ask

that you thoroughly read this manual.
The Operation, Maintenance and Warranty Manual contains specific instructions for

using and maintaining your product. We suggest that this manual remain with the

product for ready reference whenever you are on the water.
Thank you for purchasing one of our Mercury MerCruiser products. We sincerely

hope your boating will be pleasant!
Mercury MerCruiser

Содержание Inboard 5.7L



















































































Результаты поиска

Содержание Inboard 5.7L

Отзывы:

Бренды по названию

Популярные бренды

Mercury Inboard 5.7L, Руководство пользователя

Результаты поиска

Содержание Inboard 5.7L

Отзывы:

Бренды по названию

Популярные бренды