Please retain product label and instructions for future reference
IMPORTANT :
Pre-drill before fixing screws.
Pre drill
hole
30mm
screw
Step 26
Parts Needed - No. 18 QTY 2
No. 19 QTY 1
No. 20 QTY 1
Fit the Dead Lock (No. 19) into the recess
in the master door (No. 9) and secure
using the screws provided. Attach the Key
Plate (No. 20) to the slave door (No. 10)
with 4x30mm screws.
After fixing the Dead lock, add the pull
handles
(No. 18)
with 4x30mm black
screws each. Be sure that the screws fix
into the framing on the otherside of the
door.
**You have been provided with an
additional set of pull handles (No. 18).
These can be used internally on the
Garage doors, dependant on your wants
and needs. Ensure to stagger screws so
they do not collide.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
). Never-
theless the process of fixing is the same.
8x30mm Black Screws
4x30mm Screws
30mm
screw
The Lock is Reversible
a
20
9
10
18
19
19
P 15
a
b
c
c
Step 27
Parts Needed - No. 15 QTY 1
No. 21 QTY 2
Attach the Door Strip (No. 15) to the
back of the slave door using 4x40mm
screws as shown.
Once fixed, place the Pad
Bolts
(No. 21) roughly into
position and with a pencil
mark the around the bolt.
After marking the bolt onto
the frame, drill a hole for the
barrel bolt to locate into.
Following the hole being
drilled, place the pad bolts
into position and secure using
the screws provided.
4x40mm Screws
Pre drill
hole
40mm
screw
IMPORTANT :
Pre-drill before fixing screws.
b
a
21
15
