P 8
Please retain product label and instructions for future reference
25
25
31
30
Step 11
Parts Needed - No. 25 QTY 2
No. 30 QTY 1
No. 31 QTY 1
Following the method shown in the
illustration, lay the next two boards
(
No. 25 & 30
) on the window and
opposite plain side.
Once in position, place the next two
boards (
No. 25 & 31
) onto the door
and rear sides.
*Ensure that the boards are level
and flush with each other as you lay
each one.
Rubber Mallet
may be required
to fit parts.
70mm
screw
Step 12
Parts Needed - No. 22 QTY 2
No. 25 QTY 1
No. 27 QTY 1
Following the method shown in
the illustration, place the bottom
gable
(No.22)
,the remaining Log
board
(No.25)
and the finisher
board
(No.27)
onto the log cabin,
*Ensure that the boards are
level and flush with each other
as you lay each one.
Fix each board to the one below
by screwing through the notch
as shown in the illustration using
1x70mm screw per corner.
**Ensure to stagger the screws
so as not to collide with the
previous screw.
4x70mm Screws
Pre drill
hole
27
22
25
22
Rubber Mallet
may be required
to fit parts.
