P 6
Please retain product label and instructions for future reference
Step 5
Parts Needed - No. 11 QTY 1
No. 12 QTY 1
No. 13 QTY 1
No. 14 QTY 1
Arrange the left, right, top & bottom door
frames
(No’s. 11, 12, 13 & 14)
onto a level
surface. Secure the top and bottom frames to
the uprights using 2x80mm screw per corner,
ensuring the screws do
NOT
protrude through
the front of the door framing.
8x80mm Screws
Pre drill
hole
80mm
screw
13
14
11
12
IMPORTANT :
Pre-drill before fixing screws.
The lip of the door frame should
be postioned on the inside of
the building.
14
12
Step 6
Once you have laid 6 log boards (
off of the starter
)
up the door section, slide the assembled door
frame over the boards resting the frame on top of
the starter board
(if you have not yet assembled
the door frame refer to step 5)
*Please note:
This image is for illustrative purposes
and may differ from your choice in product
(
regarding door position
). Nevertheless the
process of fitting the door frame is the same.
**Please Note:
The short boards at the front of the
building (either side of the door and window
opening’s) can be placed either side depending on
your needs.
Step 7
Parts Needed - No. 25 QTY 12
No. 28 QTY 12
No. 29 QTY 12
Following the method shown in the illustration,
lay the next 6 boards (
No. 25, 28 & 29
) onto the
log cabin to create your second level.
*Ensure that the boards are level and flush with
each other as you lay each one.
25
25
29
28
28
29
