For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
P 4
Please retain product label and instructions for future reference
Pre-assembly
*Please note:
Each board interlocks at either end in a staggered pattern.
Before securing ensure that the boards are fitted properly
in their respective tongues and grooves.
Step 1
Parts Needed - No. 33 QTY 2
No. 34 QTY 2
Lay the bearers (
No. 33 & 34
) onto
a firm and level surface (
free from
areas where standing water can
collect
) as shown in the
illustration.
Fix the bearers together at each
corner using 2 screws per corner
using 8x70mm screws in total,
ensuring the bearers are flush.
Once fully assembled, ensure the
bearers are square by measuring
from corner to corner as
illustrated, making sure the
measurements are equal.
If the bearers are not aligned
equally, unscrew, adjust and
re-align accordingly.
8x70mm Screws
33
34
34
Pre drill
hole
70mm
screw
IMPORTANT:
Pre-drill before fixing screws.
33
Step 2
Parts Needed - No. 34 QTY 6
Following the same method
arrange the remaining bearers
(No. 34)
inside the assembled
frame.
*Ensure there is an equal amount
of space between each frame.
Secure each of the bearers in place
using 2x70mm screws for each
side of the bearer, ensuring .the
bearers remain level.
24x70mm Screws
Pre drill
hole
70mm
screw
34
33
34
34
34
34
34
34
34
