P 12
Please retain product label and instructions for future reference
IMPORTANT :
Pre-drill before fixing screws.
Pre drill
hole
30mm
screw
Step 20
Parts Needed - No. 18 QTY 1
No. 19 QTY 1
No. 20 QTY 1
Fit the Mortice Lock
(No. 19)
into
the recess in the master door
(No. 9)
and
secure using the screws provided. Attach
the Key Plate
(No. 20)
to the slave door
(No. 10)
with 4x30mm screws.
Fit the Door Handles
(No. 18)
and
connect with the metalbar to the mortice
lock using 8x30mm black screws. Ensure
the lock mechanism closes correctly. If not,
remove the lock and turn the catch around
using the small grub screw.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
).
Nevertheless the process of fixing the frames
is the same.
8x30mm Black Screws
4x30mm Screws
a
b
30mm
screw
The Mortice Lock is Reversible
a
b
18
20
19
10
9
Step 21
Parts Needed - No. 15 QTY 1
No. 21 QTY 2
Attach the Door Strip
(No. 15)
to the
back of the slave door using 4x40mm
screws as shown.
Once fixed, place the Tower
Bolts
(No. 21)
roughly into position at
the top and bottom of the door strip.
With a pencil mark the around the bolt.
After marking the bolt onto the
frame, drill a hole for the barrel bolt to
locate into.
Following the hole being drilled,
place the tower bolts into position and
secure using the screws provided.
4x40mm Screws
a
b
c
c
Pre drill
hole
40mm
screw
21
IMPORTANT :
Pre-drill before fixing screws.
15
b
a
