Mercedes-Benz SL 400, Руководство оператора

Страница: 322 / 614

For further information on the rear view cam-
era, see the vehicle Operator's Manual.
X
Press the W button.
The system menu appears.
X
Select Settings by turning cVd the
COMAND controller and press W to con-
firm.
X
Select Rear View Camera and press W to
confirm.
X
Select Activation by R gear and press
W to confirm.
The function is switched on O or off ª ,
depending on the previous status.
Night View Assist Plus
On vehicles with Night View Assist Plus you
can have the image from Night View Assist
Plus shown on the COMAND display.
X
Switch on COMAND (
Y
page 297).
X
Activate Night View Assist Plus, see the
separate operating instructions.
The image from Night View Assist Plus
appears in the COMAND display.
X
To adjust the brightness: select Bright‐
ness by turning cVd the COMAND con-
troller and press W to confirm.
X
Turn cVd the COMAND controller and
press W to confirm.
X
Switching automatic activation on/off:
select Night View Assist Auto. Acti‐
vation and press W to confirm.
Switch the option on O or off ª .
Option switched on: while using other func-
tions e.g. the navigation system, Night View
Assist Plus is active in the background. In
the dark, in unlit surroundings and at
speeds in excess of 37 mph (60 km/h), the
Night View image is automatically dis-
played as soon as pedestrians or animals
are detected.
X
To switch off the display: select Back and
press W to confirm or press the k but-
ton.
Navigation
Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your
COMAND system may not be equipped with
all the features described.
Introduction
Important safety notes
G WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for
the country in which you are currently driving
when operating COMAND.
COMAND calculates the route to the destina-
tion without taking account of the following,
for example:
R
traffic lights
R
stop and yield signs
R
merging lanes
R
parking or stopping in a no parking/no
stopping zone
R
other road and traffic rules and regulations
R
narrow bridges
320
Navigation
CO
MA
ND