Mercedes-Benz SL 400, Руководство оператора

Страница: 476 / 614

Please see the respective operating instruc-
tions for how to operate the external audio
source.
Information on:
R
Volume settings (
Y
page 297)
R
Sound settings (
Y
page 298)
Increasing the volume on COMAND
X
Select Volume in the AUX display by turning
cVd the COMAND controller and press W
to confirm.
A menu appears. The # dot indicates the
current setting.
X
Select Standard or Boost and press W to
confirm.
Standard : the volume of the external audio
source is adjusted to a standard value.
Boost : the volume of the external audio
source is raised by approximately 10 dB.
A device which is connected as an external
audio source may seem quieter or louder in
the vehicle, or the usual maximum volume
cannot be achieved. On some devices, it is
possible to adjust the volume separately. In
this case, start at a medium volume and
increase it gradually. This enables you to
determine whether the system is able to play
the music at high volume without distorting it.
Video
Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your
COMAND system may not be equipped with
all the features described.
General information
Automatic picture shutoff
The video image is only displayed for the
driver when the transmission lever is in posi-
tion P.
SPLITVIEW allows the front passenger to view
the video image (
Y
page 305).
When the transmission lever is disengaged
from position P, the following message
appears in the display: In order not to
distract you from the traffic situa‐
tion, the picture is faded out while
the vehicle is in motion.
As soon as the selector lever of the transmis-
sion is returned to position P, the video image
is shown.
474
Video
COMAN
D