Mercedes-Benz SL 400, Руководство оператора

Страница: 367 / 614

X
Select a category, e.g. Home , and press W
to confirm.
The input menu appears with data fields
and the character bar.
X
Proceed as described under "Character
entry (navigation)" (
Y
page 303).
X
Then select ¬ and press W to confirm.
COMAND stores the destination under the
name entered.
An address with complete address data that
is suitable for navigation can be assigned to a
pre-existing address book entry.
X
To assign an address to an address
book entry: select Assign to Address
Book Entry and press W to confirm.
X
Select a category, e.g. Home , and press W
to confirm.
You will see the address book either with
the character bar or as a selection list.
X
Select an address book entry
(
Y
page 404).
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
will appear asking whether you wish to
overwrite the existing data.
X
Select Yes or No and press W to confirm.
If you select Yes , COMAND stores the data.
You can now start route guidance to this
address directly from the address book
(
Y
page 406).
X
To save the destination as My address:
select Save as "My Address" and press
W to confirm.
COMAND stores the destination in the des-
tination memory as My Address . If the
selected address book entry already con-
tains address data that can be used for
navigation ( L icon), a prompt will appear
asking whether you wish to overwrite the
existing data.
X
Select Yes or No and press W to confirm.
If you select Yes , the entry is overwritten. If
you select No , the process will be canceled.
X
To save the destination as a personal
POI: insert the SD memory card
(
Y
page 447).
X
Select Save As Personal POI and press
W to confirm.
X
Select a category.
X
Enter the name.
The current address is saved as a personal
point of interest on the SD memory card.
Deleting a destination or the home
address
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X
Select Destination in the navigation sys-
tem menu bar by turning cVd the
COMAND controller and press W to con-
firm.
X
Select From Memory and press W to con-
firm.
You will see the destination memory list
either with the character bar (option 1) or
as a selection list (option 2).
X
Option 1: destination memory list with
the character bar: enter characters using
the character bar (
Y
page 303).
X
Option 2: destination memory list as
selection list: select a destination by turn-
ing cVd the COMAND controller and press
W to confirm.
You see the address data of the selected
entry.
X
Select Delete and press W to confirm.
A prompt appears asking whether you wish
to delete the destination.
Navigation
365
CO
MAND
Z