Mercedes-Benz SL 400, Руководство оператора

Страница: 555 / 614

!
Do not operate the tire inflation compres-
sor for longer than eight minutes at a time
without a break. It may otherwise overheat.
The tire inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer’s safety
instructions on the sticker on the tire inflation
compressor.
Using the TIREFIT kit
X
Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X
Remove the tire sealant bottle, the accom-
panying TIREFIT sticker and the tire infla-
tion compressor from the stowage well
underneath the trunk floor (
Y
page 550).
X
Affix part : of the TIREFIT sticker to the
instrument cluster within the driver's field
of vision.
X
Affix part ; of the TIREFIT sticker near the
valve on the wheel with the defective tire.
:
Tire sealant filler bottle
;
Recess
=
On/off switch
?
Connector
A
Hose
B
Flange
X
Pull plug ? with the cable and hose A out
of the housing.
X
Screw hose A onto flange B of tire seal-
ant bottle : .
X
Place tire sealant bottle : head down-
wards into recess ; of the tire inflation
compressor.
X
Remove the cap from valve C on the faulty
tire.
X
Screw filler hose D onto valve.
X
Insert plug ? into the socket of the ciga-
rette lighter or into a 12 V power socket in
your vehicle.
Observe the notes on the cigarette lighter
(
Y
page 520). Observe the notes on sock-
ets (
Y
page 520).
X
Turn the SmartKey to position 1 in the igni-
tion lock (
Y
page 151).
X
Press on and off switch = on the tire infla-
tion compressor to I.
The tire inflation compressor is switched
on. The tire is inflated.
i
First, tire sealant is pumped into the tire.
The pressure can briefly rise to approx-
imately 500 kPa (5.0 bar/73 psi).
Do not switch off the tire inflation com-
pressor during this phase.
X
Allow the tire inflation compressor to run
for five minutes. The tire should then have
Flat tire
553
Breakdow
n
assistance
Z