Lights
89
Combination switch (turn signals,
main-beam headlamps and headlamp
flasher)
Turn signals
Combination switch
1
Right-hand turn signal
2
Left-hand turn signal
X
To switch on: press the combination
switch in the direction of arrow
1
or
2
.
The corresponding turn signal indicator
lamp
K
or
L
in the instrument clus-
ter flashes.
i
If you only wish to indicate a minor change
of direction, press the combination switch
briefly in the appropriate direction. The cor-
responding turn signal flashes three times.
Main-beam headlamps/headlamp flas-
her
Combination switch
1
Main-beam headlamps
2
Headlamp flasher
Main-beam headlamps
X
Make sure that the key is in position 2 of
the ignition lock or that the engine is run-
ning.
X
Turn the light switch to
B
or
U
12
.
X
To switch on: press the combination
switch in the direction of arrow
1
.
The main-beam indicator lamp
A
in the
instrument cluster lights up.
X
To switch off: move the combination
switch back to its normal position.
The main-beam indicator lamp
A
in the
instrument cluster goes out.
Headlamp flasher
X
To switch on: briefly pull the combination
switch in the direction of arrow
2
.
12
In the
U
position, the main-beam headlamps are only switched on when it is dark.
Controls
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00 - Seite 89
Z
Dateiname: 6515_3089_02_buchblock.pdf;
preflight
