Replacing the wiper blades
264
X
Turn the corresponding bulb holder anti-
clockwise and remove it.
X
Pull the corresponding bulb out of the bulb
holder.
X
Insert the appropriate new bulb into the
bulb holder.
X
Insert the corresponding bulb holder and
turn it clockwise.
X
Close the side trim panel (
Y
page 263).
Changing the bulbs in the licence plate
lamps
Licence plate lamp
1
Screws
X
Switch off the lights.
X
Open the boot lid.
X
Remove screws
1
.
X
Remove the licence plate lamp.
X
Replace the bulb.
X
Insert the licence plate lamp.
X
Replace and tighten screws
1
.
Replacing the wiper blades
G
Risk of accident
The windscreen will not longer be properly
wiped if the wiper blades are worn. This
could prevent you from observing the traffic
conditions, thereby causing an accident.
Replace the wiper blades twice a year, ide-
ally in spring and autumn.
G
Risk of accident
The wiper arms could start moving and
cause an injury if you leave the windscreen
wipers switched on.
Remove the key from the ignition lock
before replacing the wiper blades.
!
Make sure that you touch only the wiper
arm of the windscreen wiper to avoid dam-
aging the windscreen wiper blades.
Practical advice
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00 - Seite 264
Dateiname: 6515_3089_02_buchblock.pdf;
preflight