Troubleshooting
252
Problem
Possible cause/consequence Suggested solutions
The key cannot be turned in the
ignition lock.
The key has been in position 0 for
a considerable time.
X
Remove the key and reinsert it into the ignition lock.
X
Check the starter battery and recharge it if necessary
(
Y
page 276).
X
Start the engine.
The on-board voltage is too low.
X
Switch off non-essential consumers, e.g. seat heating* or interior
lighting, and try to turn the key again.
If this does not work:
X
Check the starter battery and recharge it if necessary
(
Y
page 276).
or
X
Jump-start the vehicle (
Y
page 279).
or
X
Consult a qualified specialist workshop.
Practical advice
* optional
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00 - Seite 252
Dateiname: 6515_3089_02_buchblock.pdf;
preflight